Duke's Day 2015 - Shaping HB Rainbow Boards

Duke's Day 2015 - Shaping HB Rainbow Boards

A 7'6 Hot Buttered Sunset Gun (Rainbow Board) will be on display at this week's Duke's Day, Freshwater. Jack McCoy asked Terry Fitzgerald to comment on the original board he rode and the following handshapes he created from the 1971 Duke Kahanamoku Classic in Hawaii in which Terry was the finalist and Australia’s only representative. The TF story is as follows (extracted from copy written for Rusty P... and used in TSJ a couple of years ago):

• My very first idea came from Bunker, surfing Pokala rights in summer
1971. He had a rope handled kneeboard which he paddle in laying down,
took off on his knees and then pulled on the handles for his trim line
and then stood up. He had small keel shaped resin fins stuck in the tail
rail to help keep a high line.

• The jump came in the our winter of ‘72. My Hawaiian influenced boards
just did not have enough tail area to skate over the flat-spots at Narrabeen.
So, I ADDED wings (or what we called flyers). The idea was that ß
by adding the wing to the rail it would add more planning area flat, but,
you would still have a narrow tail for in the pocket and bigger waves.
The ‘wing/flyer’ had to be pinched to allow the rail to stay in the wave
and run you higher as well (á la Bunker’s idea). But, the wing also gave
you a break point for snapping out of the lip. So, three pure benefits
i) More planning area to get across the flats
ii Pinched wing to stick in the face and ride high on
iii) A break point in the rail to snap off the lip on
Tested in Hawaii that year and then launched in December ‘72,
January ‘73 in Australia.

• ADDED: note - wings we not something you created by cutting a piece
out of the tail of your board. They were ADDED to the rail line / foil
and planshape...and pinched to have minimum effect of rail line
entry and line, but, maximum effect on planning area when flat,
plus the increased ability to run high and hold a high line.


“My whole wing thing only came with concaves - a double edged development.
Concave to get you up the face, wings to hold the high line.” TF

 

Hank Warner handshapes for HB - USA

Hank Warner handshapes for HB - USA

Terry, a guy walked into Diamond with this HB EPS/Epoxy built in 1985/august. It was in great condition.....thought Id share it with you for yucks, Hank

Custom surfboard - Rainbow Collection by TF

A very happy custom shape client...

 

Cheyne Horan style custom surf board

Rory's Board

Made a few of these for Cheyne back in the '80's (he won Bell's on one too).
Rory had a red one made and rode it for a lifetime. Just re-birthed another for him.
Edged tail, concave v, bow nose, winged keel - a true customs for those who go
where none have gone before.

TF

Restored Hot Buttered Round Wing Swallow

We thought we should share the following story. For new Swallow Tails, check out RAINBOW CUSTOM BOARDS Mid 70's retsored HB swallow tail Hello, I'd like to show you a classic HB I have recently had restored.  The board is 6'5", wing swallow tail, single to double concave, a yellow spray (beyond the fade of time) with pinched low rails in the tail toward the flyers.  It is numbered 5083. Personally, I'm over the moon as I've wanted a HB like this since I was 17 in 1992.  I grew up surfing single fins in WA in the 1990's, when like minded people were fairly thin on the ground and HB's were made of unobtainium. Greg who ran Oceans surf shop had a couple of them - massive airbrushed guns that made the greatest statement I'd ever seen on a surfboard.  I was in awe. If you have any more information about the board, I'd love to learn as much as I can about it.  Any tips for riding?  I am more at home on single fins anyway.  How would it differ from riding a Drifta III - if I was lucky enough to order one from you in the future? It will now be preserved as long as this History graduate can keep it - and surf it from time to time! Lastly, a very big thank you to TF, KF and JF for the inspiration over the years. Kind regards John, Torquay   Hi John, 5083 would place it in the mid-70's, so one of the earlier round wing swallows. Not shaped by me, but, by Frank Williams (later of tri-fin fame). Frank worked to my designs and was incredible at getting production through, hence the 'Designed by.... decal under the rainbow. Yes, surfs very different from a Drifta, those little side fins really do help transform a wide tail into a tight tail. However, what you have there is the beginning of today's standard bottom shape, concave and v combos.... with wings. Thanks for the compliments, much appreciated. John, you have to surf this bugger OK.... paddle it out at Winki on a mid-size day and aim it. Have fun. Terry  

Hot Buttered handspray surfboards by Martyn Worthington

Hot Buttered airbrush art

Hot Buttered Handshape surfboards by Terry Fitzgerald

Hot Buttered Handshapes

Hot Buttered Surfboards Airbrush Art & Mural art

Martyn Worthington, HB's airbrush artist for Terry Fitzgerald custom handshape surfboards gets a write-up:

http://www.rockpaperink.com/content/column.php?id=491

Martyn's creative force is also captured on Hot Buttered Skateboard decks:

HB Skateboards

Max Tag for Hot Buttered by Mark Onorati

Max Tag by Onorati

Hot Buttered movies

The re-release of SULTANS OF SPEED - first time available since it's VHS release in 1989 is now available from The Surf Network... http://www.thesurfnetwork.com/movies#search/sort=mp/query=sultans Hot Buttered Movies

Hot Buttered EVE surfboard

HB EVE surfboard is no longer in production. Can be custom made to order - email: hotb1971@hotbuttered.com

Check the current range of HB surfboard models...

Hot Buttered EVE Surfboard

Derek Hynd

Courtesy of Hardcore Magazine: "The fountain of youth: Derek Hynd and revolution planks without keel. Check out the video" (The music's pretty cool too) http://hardcore.uol.com.br/18827-HC_de_Julho Derek Hynd